For example, if the recommended seeding rate for a specific blend of grasses is 6 pounds per 1,000 square feet, multiply 6 by 43.56 to get 261.36. Thus you would need just over 261 pounds of seed for 1 acre.

Directions – Recommended Seeding Rates: New Establishment 4-5 **lbs**/1000 sq ft Renovation 20-**50** percent existing **cover** 3 to 4 **lbs**/1000 sq ft **50** to 75 percent existing **cover** 2 to 3 **lbs**/1000 sq ft Recommended Maintenance Practices: Shade Mix responds best to a moderate fertility program.

Subsequently, question is, how many pounds of grass seed do I need per square foot? To determine the amount of **seed** you’ll need **per square foot**, consider the **grass** type. Kentucky bluegrass requires 1 to 2 **lbs**. of **seed per** 1,000 **square feet**. Perennial ryegrass and tall fescue requires 5 to 9 **lbs**.

Then, how many pounds of grass seed do you need to overseed an acre?

For colonial and creeping bentgrasses, the **seeding** rate is usually 1/2 to 1 **pound** per 1,000 square feet. Plan on requiring about 3 **pounds** of bluegrass **seed**, 10 **pounds** of ryegrass **seed**, 4 **pounds** of red fescue, 5 **pounds** of hard fescue or 8 to 10 **pounds** of tall fescue **seed** for every 1,000 square feet of turf.

How much does it cost to seed an acre?

**Cost** data is based on research by HomeAdvisor. Homeowners can expect to pay between $500 and $4,000, or an **average** of $1,000, for hydroseeding a typical 5,000 to 10,000 square foot lawn. Hydroseeding averages between $0.06 to $0.20 per square foot or $2,000 to $4,000 per **acre**.

### Can you just sprinkle grass seed on lawn?

By applying grass seed over an existing lawn, you can help fill in bare spots and reinvigorate your lawn. The weather, kids, and pets can be tough on lawns. Lack of water, too much heat, wear & tear, and other problems can make it look worn and thin. You can help reinvigorate your lawn by overseeding.

### Can you put too much grass seed?

All plants, including grass plants, need adequate soil space for roots to spread and develop. If you put down too much grass seed, you will encourage competition that will cause your grass seedlings to struggle after germination because there will be excessive competition for sunlight, soil nutrients, and water.

### How do I calculate how much grass seed I need?

Since one acre = 43,560 square feet, first begin dividing 1000 square feet by 43,560 to get 43.56. Then multiply 43.56 by the pounds of grass seed for each 1,000 square feet to get the amount of grass seed needed per acre.

### Do you have to cover grass seed for it to grow?

When you spread grass seed into a thinning lawn, it is not necessary to rake the area. However, repairing bare soil patches with new grass seed does require raking. Similar to new lawns, your exposed topsoil needs to cover the grass seeds slightly for maximum growth.

### How do I calculate how much grass I need?

Calculate the quantity of grass you need. Rectangle or square: Multiply the width times the length for total area. For example: 50 ft x 70 ft = 3500 sq ft. Triangle: Multiply the base times the height, and then divide by 2 (area = base x height / 2). For example: 10 ft x 20 ft = 200 ft / 2 = 100 sq ft.

### How much should I charge for overseeding?

A good rule of thumb is to charge for aeration, overseeding and fertilization about twice what you’d charge for aeration alone, so, if you charge $75 to aerate a lawn smaller than 5,000 square feet, you’ll charge $150 to aerate, overseed and fertilize that same lawn.

### What’s the fastest growing grass seed?

Bermudagrass is the fastest-growing warm-season grass for lawns.

### What is the best way to sow grass seed?

Grass seed is best sown from late summer to mid-autumn; there is less competition from weeds, and the soil is warm, and damp from rain. Perfect for seeds to germinate. If you miss the opportunity to sow in autumn, try in mid-spring, but only if you can give the new grass plenty of water.

### How much grass seed do I need for 1/2 acre?

For example, if the recommended seeding rate for a specific blend of grasses is 6 pounds per 1,000 square feet, multiply 6 by 43.56 to get 261.36. Thus you would need just over 261 pounds of seed for 1 acre.

### Can you put down fertilizer and grass seed at the same time?

Applying a starter fertilizer the same time as seeding a new lawn will ensure the emerging grass stalks have the nutrients they need to jump-start their growth. When seeding a lawn, you should never apply the fertilizer and seed together.

### What is the best grass seed for overseeding?

Annual grasses must be reseeded every year. Overseeding lawns containing Bermudagrass is common in the south. By using a cool season grass seed variety the lawns retains a green color throughout winter. Annual ryegrass, perennial ryegrass and turf-type tall fescue or bluegrass are often used.

### Do you have to aerate before overseeding?

The best time to aerate your lawn is during the fall before you begin a fertilization program or decide to overseed. The aeration spikes should penetrate the soil at least 1 ½ inches deep, depending on your existing soil conditions. Run your irrigation system after the turf has been aerated.

### How much is Kentucky bluegrass per acre?

Kentucky bluegrass should be planted at 10 to 14 pounds per acre in late summer or early fall when temperatures begin to moderate and rains are more frequent. Higher seeding rates ensure quicker ground cover. Kentucky bluegrass is slightly slower to establish than many other cool-season grasses.

### How many pounds of fertilizer do you need per acre?

The suggested amount of nitrogen for 1,000 square feet of grass is 1 lb. Since an acre of lawn is 43,560 square feet, divide that by 1,000, according to the University of Illinois. That equals 43.56, then multiply that by the number of lbs. of fertilizer needed per 1,000 feet, which, in this case is 1 lbs.